Preventative Maintenance Schedules Home

After Every job:  Clean waste tank filter and/or screen

Check engine oil level Lube Vacuum blower impellers (WD-40) Check oil level in water / solution pump Check radiater coolant on water cooled engines  Every day:

Every month: Check crank case oil in vacuum blower 

Every two weeks: Lube bearing grease on vacuum blower

Clean in-line filter on lower panel and its associated female socket Check gear oil on vacuum blower After first 25 hours:

Grease rear fitting on Dayton Dual Piston Pump Oil bathed pumps change crank case oil first 50 hours when new and 500 hours there after Change engine oil (repeat every 50 hours) At 50 hours

Change engine oil (Manufacturers recommended) Check and clean air filter for engine Change gear oil on vacuum blower  ( next change at 1000 hours) Check  belt tension on water pump Change engine oil filter Check engine spark plugs

At 100 hours:

Change engine oil Change air filter Change spark plugs Check gas filter Check fan belt on water cooled engines Check belt tension on water pump

At 200 hours:

Change radiater coolant on water-cooled engine Change fuel filter Change solution pump oil At 500 hours: